CPD module in using a Chainsaw from a Rope and Harness (C&G nptc) 004104
Course Overview:
CPD Module 004 – Using a Chainsaw from a Rope and Harness
This course is for individuals who are qualified aerial chainsaw operators and under Provision and Use of Work Equipment Regulations (PUWER) are required to have refresher training every 3 to 5 years. One-day training covers the appropriate practical skills required to meet legislation, industry technical standards and industry good practice. The training is delivered by a C&G NPTC approved assessor. Candidates will complete skills tests which will be scored, each test has a minimum score for the CPD module to be achieved. The assessor will complete a feedback form on the candidate’s performance and advise of any recommendations required.
You should have a good level of fitness to carry out the practical elements of this training course safely.
Candidates MUST have their own tree climbing equipment which complies with LOLER Regulations. This means providing a receipt of purchase if equipment is less than 6 months old. Or, produce evidence the equipment has been thoroughly examined by a “competent person” in the last 6 months, and inspected weekly with an accompanying record which can verify this.
Equipment:
- Approved tree climbing harness in good condition. CE marked with leg loops
- 2 x Climbing ropes – minimum 11.7mm, 35-50m long required with manufacturers eye and without any defects
- 6 x self-locking 3 movement Karabiners
- Friction device for each main line and short strop, either mechanical or rope ie zigzag or prussik loops
- Spare prussik loop for rescue
- 1 x adjustable strop for climbing and rescue recommended 5m in length must have a manufacturers eye
- 1 x Set of climbing spikes
- Teufeleberger multi saver 2m
- 1 x Steel core flip line 3m or 5m with adjuster and soft link for cutting
- 1 x Top or rear handled chainsaw
- Climbers may carry a knife with either a lockable folding blade or a fixed blade held in a protective sheath
Personal Protective Equipment:
- Safety helmet (the HSE Arboriculture and Forestry Advisory Group (AFAG) recommends a mountaineering-style helmet complying with BS EN 12492)
- Hearing protection complying with BS EN 352
- Eye protection/ mesh visor complying with BS EN 1731
- Gloves appropriate to the task and subject to the operator’s risk assessment
- All round leg and groin protection (complying with BS EN 381-5). AFAG strongly recommends Type C leg protection for aerial work.
- Chainsaw boots with good grip and ankle support complying with BS EN ISO 17249
- Non snag outer clothing. The use of high-visibility clothing may also be appropriate.
- Personal first-aid kit, as a minimum a large wound dressing, barrier gloves, plasters and whistle
Location:
Ongar, Essex
Duration:
One-day CPD
Cost:
£240 + £34 vat = £274
How to book:
Contact us for more information and details of group bookings (up to 4 candidates)
Tree Climbing & Rescue With DJ Gemmill In Essex
DJ Gemmill is a Lantra and City & Guilds approved training provider operating across the Essex area. This means we can offer excellent chainsaw and tree climbing & rescue training enabling you to gain your qualification in the best possible way. When you’re choosing a training provider for your NPTC Award Certificate of Competence we want you to choose one that is partnered with the largest recognised skills organisation in the UK. DJ Gemmill has the knowledge, experience and backing to deliver nationally approved Lantra and City & Guild courses. Our instructors, tutors and assessors have many years experience and our classes always have a small number of candidates. We believe in getting the most out of you to make sure you are ready to competently operate a chainsaw safely.
Interested? Get in contact and we can talk you through your options.
Other Lantra and City & Guild Courses
We also offer other Lantra and City & Guild Awards across other industries.
Address
Sayers Farm, Lower Bovinger Green, Ongar, Essex
CM5 0NE
Call Us
07832 968507