CPD Module – Felling Trees up to 380mm (C&G NPTC) 0041-02

Location: Woodland near Ongar, Essex

Duration: One-day CPD

£286.00 Inc VAT

Candidates must have achieved the prerequisites:

Level 2 Certificate of Competence in Felling Small Trees up to 380mm

CPD Module 002 – Felling Small Trees up to 380mm

This CPD module delivered by a City & Guilds NPTC approved assessor is for qualified chainsaw operators who under the Provision and Use of Work Equipment Regulations 1998 (PUWER), are required to undertake refresher training every 3 to 5 years. This module provides a structured, industry‑recognised way to meet that requirement.

One-day CPD focusing on the practical skills needed to comply with current legislation, industry technical standards and best practice. Candidates will complete a series of scored skills tests, each with a minimum pass mark required to successfully complete the module. Constructive feedback will be provided on performance, along with recommendations for further development where appropriate.

Candidates benefit from being trained on their own machines, but our equipment is available if needed at no extra cost.

Petrol driven chainsaw with maximum recommended guide bar 15 inch.
Relevant chainsaw operator’s manual (paper or electronic copy).
Maintenance tools eg wrench and screwdriver.
Sharpening kit eg round file, flat file, file guide, depth gauge tool, filing stump vice.
Felling and lifting aids eg felling lever, felling wedge, timber tongs/hook, turning strap, measuring aid.
Fuel and biodegradable chainsaw oil in approved container(s).

Safety helmet complying with BS EN 397 or BS EN 14052 (only recommended for groundwork).
Hearing protection complying with BS EN 352-1 or BS EN 352-2 or BS EN 352-3.
Eye protection/ mesh visor complying with BS EN 1731.
Gloves complying with BS EN 381-7.
All round leg and groin protection complying with BS EN 381-5.
AFAG recommends Type C leg protection. Where Type C is impractical (eg risk of heat stress), it may be appropriate to use Type A, where justified by risk assessment.
Chainsaw safety footwear complying with BS EN ISO 17249.
Non snag outer clothing (preferably high vis).
Personal first aid kit, as a minimum a large wound dressing, barrier gloves, plasters and whistle.