CPD Module 003 – Tree Climbing and Aerial Rescue

This CPD module delivered by a City & Guilds NPTC approved assessor is for qualified climbers who under the Provision and Use of Work Equipment Regulations 1998 (PUWER), are required to undertake refresher training every 3 to 5 years. This module provides a structured, industry‑recognised way to meet that requirement.

One-day CPD focusing on the practical skills needed to comply with current legislation, industry technical standards and best practice. Candidates will complete a series of scored skills tests, each with a minimum pass mark required to successfully complete the module. Constructive feedback will be provided on performance, along with recommendations for further development where appropriate.

A reasonable level of physical fitness is required to undertake the practical elements of this course.

Candidates MUST provide their own tree climbing equipment compliant with LOLER Regulations. This means providing a receipt of purchase if equipment is less than 6 months old. Or, produce evidence the equipment has been thoroughly examined by a “competent person” within the last 6 months. In addition, weekly inspections must have been carried out and recorded, with documentation available to verify this.

*We are able to provide climbing spikes.*

Our instructor has provided the following kit recommendation. However, as an experienced climber you should feel comfortable with your own 2 rope system.

Approved tree climbing harness in good condition, CE marked with leg loops.
2 x Climbing ropes – minimum 11.7mm, 35-50m long required with manufacturers eye and without any defects.
6 x self-locking 3 movement Karabiners.
Friction device for each main line and short strop, either mechanical or rope ie zigzag or prussik loops.
Spare prussik loop for rescue.
1 x adjustable strop for climbing and rescue recommended 5m in length must have a manufacturers eye.
1 x Set of climbing spikes.
Teufeleberger multi saver 2m.
1 x Steel core flip line 3m or 5m with adjuster and soft link for cutting.
Knife with retractable blade or handsaw.

Safety helmet (the HSE Arboriculture and Forestry Advisory Group (AFAG) recommends a mountaineering-style helmet complying with BS EN 12492).
Eye protection complying with either BS EN 1731 or BS EN 166.
Gloves appropriate to the task and subject to the operator’s risk assessment.
Protective boots with good grip and ankle support complying with BS EN ISO 20345.
Non snag outer clothing (preferably high vis).
Personal first aid kit, as a minimum a large wound dressing, barrier gloves, plasters and whistle.